Tilbehør – Base Station

 Description Part number
CHANNEL SELECTORS
Manual channel selector for 32 channels. CH032
TONE MODULES & REPEATER CONTROLLERS  
CTCSS encoder / decoder & repeater controller. For installation inside radio units RE6xx TP-2263
5-tone encoder / decoder & repeater controller. For installation inside radio units RE6xx TP-2289
DUPLEX FILTERS
Duplex filter VHF 160 MHz 50W DF601
Duplex filter VHF mid-band 80 MHz 50W DF602
Duplex filter UHF 450 MHz 50W DF603
CIRCULATORS
Circulator for VHF band (160 MHz) 40W – BNC connector. IS230
Circulator for VHF band (80 MHz) 40W – BNC connector. IS440
Circulator for UHF band (450 MHz) 40W – BNC connector. IS730
POWER SUPPLY & VOLTAGE CONVERTERS
Power supply 100-240 V/13,2 V – 14A continuous. For the BS2000. PS005
Power supply 100-240 V/13,2 V – 14A continuous. With failure indication. For the BS2000. PS009
Power supply table unit 100-240 V/12 V – 8,5A For the TP6000 radio units. PS010
24V to 15V converter. CV003
48V to 12V converter – 12A. CV006
24V to 15V converter – 12A continuous, galvanic isolated. CV010
VARIOUS MODULES / UNITS
Modem for telephone line to radio interface, 24 kbps. TM601
4-wire line interface, with opto-couplers for key & squelch signals. TF602
2-wire line interface, used in radio to modem interface. TP-1287
Fault monitoring & switching unit for duplicated base stations. SU602
Power monitor unit for monitoring forward & reflected RF energy on antenna line. PM601